User manual

APOS KANJI User Manual Page 15 / 45
Ref : 3103039-FDE Issue A
3.8. Self Test
A self-test is invoked by pressing the paper feed button during a reset (power up or pressing on/off
button). On entering the self-test mode, the printer checks its internal hardware and prints a report
which will include the following information:
• Kanji set : on/off
• product reference
• serial number
• whether a cutter is fitted or not
• what type of interface is fitted
• switch settings (but not for Centronics versions)
• paper sensitivity setting (set via software)
• Address of printer
• Print density adjustment setting (set via software)
• internal RAM status