User manual

APOS KANJI User Manual Page 14 / 45
Ref : 3103039-FDE Issue A
3.7. Configuration of Switches
To set the switches the following procedure must be respected:
• Switch the printer off
• Set the switches as requested (see tables below).
• Switch the printer on
3.7.1. RS232 mode
Switches 1,2,3 and 6 are used to define functions. Switches 4 and 5 are used to set the data
transmission speed.
Switch ON OFF
1 XON/XOFF control DTR/DSR
2 No Parity Parity
3 Odd parity Even parity
6 (not used) (not used)
Switch numbers 4 and 5 are dedicated to define the baud rate as follows :
Baud rate Switch 4 Switch 5
4800 OFF OFF
9600 ON OFF
19200 OFF ON
38400 ON ON
3.7.2. Centronics mode
All switches should be set OFF for printers equipped with Centronics connectors.