User manual

APOS Premium Printer Series User Manual Page 93 /136 Reference: FDE 3107312 Issue A

Decimal Hex Fault recovery mode

1 01 Restarts printing from the beginning of the line where a fault occurred,

after recovering from the fault.

Print settings that are normally preserved from line to line, such as

character height and width, are still preserved with this operand.

2 02 Recovers from a fault after clearing the receive and print buffers. Print

settings that are normally preserved from line to line, such as character

height and width, are still preserved with this operand.

Notes:

• This command is equivalent to the ‘GS ETX’ command.

• This command will attempt recovery from any fault that prevents printing including jams and paper

out.

• Recovering from a print head over temperature condition is only accomplished by waiting until the

print head has returned to its operating temperature range.

• This command will be ignored until manual intervention has occurred to clear the fault condition. The

indication of manual intervention for clearing paper out, paper jams and cutter fault consists of opening

and closing the clamshell.

This command will select the recovery mode when the printer detects a fault condition. Any fault condition

that prevents the printer from any printing function requires one of these commands to allow printing to

resume. See the equivalent ‘DLE ENQ’ command for the operand definition.

GS Sequence

ASCII

GS ETX n

Hexadecimal 1D 03 n

Decimal

29 3 n

Operand:

n = recovery mode

Limit:

Decimal:

1 ≤ n ≤ 2

Hex:

01 ≤ n ≤ 02

Notes:

• This command will attempt recovery from any fault that prevents printing including jams and paper out

• Recovering from a print head over temperature condition is only accomplished by waiting until the print

head has returned to its operating temperature range.

• This command will be ignored until manual intervention has occurred to clear the fault condition. The

indication of manual intervention for clearing paper out, paper jams and cutter fault consists of opening

and closing the clamshell.