User manual

APOS Premium Printer Series User Manual Page 75 /136 Reference: FDE 3107312 Issue A
D
OWNLOAD BMP LOGO
Enters a downloaded BMP logo into RAM or Flash.
The downloaded BMP logo can be printed by using the Print Downloaded Image
(1D 2F n) command.
To download a BMP file to save it as a logo, send the ESC (1Bh) character followed by the whole BMP
file.
The printer decodes the BMP file header and will save the image data after checking important parameters,
such as :
- Width
- Height
- Number of colors ( only monochrome images are accepted)
ASCII
ESC “BMP file”
Hexadecimal 1B “BMP file"
Decimal
27 “BMP file”
Value
Maximum width = 576
Maximum height = 512
Exceptions
BMP file images that are not monochrome are ignored.
Related Information
Microsoft BMP bitmap file format.
See command “Return Logo Checksum” (1F 65 n)
P
RINT DOWNLOADED BIT IMAGE
Prints the downloaded bit image in RAM or Flash at a density specified by m. It is ignored if any data is in
the print buffer, if the downloaded bit image is undefined.
See the illustration on the previous page for a representation of the bit image.
ASCII
GS / m
Hexadecimal 1D 2F m
Decimal
29 47 m
Value and Range of m
Value of m Print Mode Vertical DPI
1
Horizontal DPI*
0
1
2
3
Normal
Double Wide
Double High
Quadruple
203
203
101
101
203
101
203
101
1
Dot density measured in dots per inch