User manual

APOS Premium Printer Series User Manual Page 70 /136 Reference: FDE 3107312 Issue A

ELECT BIT IMAGE MODE

Sets the print resolution and enters one line of graphics data into the print buffer. Excess data is accepted

but ignored. Any print command is required to print the data, after which the printer returns to normal

processing mode. See the illustration for graphic representations of the bit image.

ASCII

ESC * m n1 n2 d1 ... dn

Hexadecimal 1B 2A m n1 n2 d1 ... dn

Decimal

27 42 m n1 n2 d1 ... dn

Value of m

Value

of m

Mode No. of Dots

(Vertical)

No. of Dots

(Horizontal)

No. of

Dots/Line

0 8 Dot Single Density 8 (68 DPI) 0-288 (101 DPI) 8 x 288

1 8 Dot Double Density 8 (68 DPI) 0-576 (203 DPI) 8 x 576

32 24 Dot Single Density 24 (203 DPI) 0-288 (101 DPI) 24 x 288

33 24 Dot Double Density 24 (203 DPI) 0-576 (203 DPI) 24 x 576

Value of n

Value of n (8-Dot

Single Density Mode)

Value of n (24-Dot Single

Density Mode)

Value

of d

n1 + (256 x n2) 3 x [n1 + (256 x n2)] Number of Bytes of Data

(Printed Down, Then Across)