User manual

APOS Premium Printer Series User Manual Page 56 /136 Reference: FDE 3107312 Issue A
S
ELECT DOUBLE-WIDE CHARACTERS
Prints doublewide characters. The printer is reset to singlewide mode after a line has been printed or the
Clear Printer (10) command is received. Doublewide characters may be used in the same line with
singlewide characters.
ASCII
DC2
Hexadecimal 12
Decimal
18
Exceptions
Doublewide characters may not be used in the same line with single or double-density graphics.
S
ELECT SINGLE-WIDE CHARACTERS
Prints singlewide characters. Singlewide characters may be used in the same line with doublewide
characters.
ASCII
DC3
Hexadecimal 13
Decimal
19
Exceptions
Singlewide characters may not be used in the same line with single or double-density graphics.
S
ELECT 90 DEGREE COUNTER-CLOCKWISE ROTATED PRINT
Rotates characters 90 degrees counter-clockwise. The command remains in effect until the printer is reset
or until a Clear Printer (10) or Cancel Rotated Print (1B 56) command is received.
ASCII
ESC DC2
Hexadecimal 1B 12
Decimal
27 18
Related Information
See “Summary of Rotated Printing” in this document.