User manual

APOS Premium Printer Series User Manual Page 47 /136 Reference: FDE 3107312 Issue A
S
ET LINE SPACING
Sets the line spacing to [n x horizontal or vertical motion units] .
The minimum line spacing is 8.5 lines per inch. The line spacing equals the character height when n is too
small.
If the Set Horizontal and Vertical Minimum Motion Units command (1D 50) is used to change the
horizontal and vertical minimum motion unit, the parameters of this command (SetLine Spacing) will be
interpreted accordingly.
ASCII
ESC 3 n
Hexadecimal 1B 33 n
Decimal
27 51 n
Value of n
N x vertical motion unit
Range of n
0-255
Default
0.16 inch (4.23 mm)
Related Information
For more information, see the description of the Set Horizontal and Vertical Minimum Motion Units
command in this document.
P
RINT AND FEED PAPER
Prints one line from the buffer and feeds the paper [n x horizontal or vertical motion units]. The line height
equals the character height when n is too small.
If the Set Horizontal and Vertical Minimum Motion Units command (1D 50) is used to change the
horizontal and vertical minimum motion units, the parameters of this command (Print and Feed Paper) will
be interpreted accordingly.
ASCII
ESC J n
Hexadecimal 1B 4A n
Decimal
27 74 n
Value of n
n x horizontal
or vertical
motion units
Range of n
0-255
Related Information
For more information, see the description of the Set Horizontal and Vertical Minimum Motion Units
command in this document.