User manual

APOS Premium Printer Series User Manual Page 42 /136 Reference: FDE 3107312 Issue A
S
ELECT CUT MODE AND CUT PAPER
Selects a mode for cutting paper and cuts the paper. There are two formats for this command: one requiring
one parameter m; the other requiring two parameters, m and n; the format is indicated by the parameter m.
ASCII
GS V m GS V m n
Hexadecima
l
1D 56 m 1D 56 m n
Decimal
29 86 m 29 86 m n
Value of m
Selects the mode as shown in the table
Value of n
Determines the cutting position
Operand: m = cut mode
n = additional distance to feed prior to cut beyond the cut position
Limit: OPTION 1:
OPTION 2:
Decimal:
0 ≤ m ≤ 1 48 ≤ m ≤ 49 65 ≤ m ≤ 66 0 ≤ n ≤ 255
Hex:
00 ≤ m ≤ 01 30 ≤ m ≤ 31 41 ≤ m ≤ 42 00 ≤ n ≤ FF
“GS V” OPERAND DEFINITION
M
Decimal Hex Cut mode
0, 48 00, 30 Full cut
1, 49 01, 31 Partial cut
65 41 Feeds paper n x vertical motion units beyond the cut
position, then executes a full cut
66 42 Feeds paper n x vertical motion units beyond the cut
position, then executes a partial cut