User manual

APOS Premium Printer Series User Manual Page 41 /136 Reference: FDE 3107312 Issue A
6.3 Paper Cut commands
P
ERFORM FULL KNIFE CUT
Cuts the receipt. Use either Hex 19 or Hex 1B 69.
There are two codes for this command. Both codes perform the same function.
ASCII
EM ESC i
Hexadecimal 19 1B 69
Decimal
25 27 105
P
ERFORM PARTIAL KNIFE CUT
Partially cuts the receipt. The length of the cut can be changed through the configuration menu. The default
setting leaves 0.20 inches (5 mm) of paper on the left edge. See Setting Partial Cut Distance in Diagnostics.
There are two codes for this command. Both codes perform the same function.
ASCII
SUB ESC m
Hexadecimal 1A 1B 6D
Decimal
26 27 109
Formulas
The cut edge is 144 dot rows or 0.71 inch (18 mm) above the print station.
Exceptions
The command is valid only at the beginning of a line.