User manual

APOS Premium Printer Series User Manual Page 36 /136 Reference: FDE 3107312 Issue A
Code (Hexadecimal) Command Page
1B 44 [n]...k NUL
Set Horizontal Tab Positions 50
1B 45 n
Select or Cancel Emphasized Mode 57
1B 47 n
Select or Cancel Double Strike 58
1B 49 n
Select or Cancel Italic Print 58
1B 4A n
Print and Feed Paper 47
1B 4B n1 n2 d1...dn
Select Single-Density Graphics 72
1B 4C
Select Page Mode 101
1B 52 n
Select International Character Set 67
1B 53
Select Standard Mode 102
1B 54 n
Select Print Direction in Page Mode 102
1B 56 n
Select or Cancel 90 Degree Clockwise Rotated Print 59
1B 57 n1 n2...n8
Set Print Area in Page Mode 104
1B 59 n1 n2 d1...dn
Select Double-Density Graphics 72
1B 5B 7D
Switch to Flash Download Mode 110
1B 5C n1 n2
Set Relative Print Position 51
1B 61 n
Select Justification 52
1B 63 34 n
Select Sensors to Stop Printing 43
1B 63 35 n
Enable or Disable Panel Button 117
1B 64 n
Print and Feed n Lines 48
1B 69
Perform Full Knife Cut 41
1B 6D
Perform Partial Knife Cut 41
1B 70 m n1 n2
Generate Solenoid Pulse 108
1B 74 n
Select International Character Set 67
1B 75 00
Transmit cash drawer status 77
1B 76
Transmit Paper Sensor Status 78
1B 7B n
Select or Cancel Upside-down Print Mode 59
1C 44 f8 t w h sL sH nL nH {d}
Download Double Byte Font 122
1C 45 f8
Download Double Byte Font Complete 123
1C 46 t
Read font information and checksum 123
1C 47 w h {d}
Download and print one character 124
1C 48
Check EasyFont compatibility 124
1C 4C f8 t w h {d}
Download Single Byte Font 121
1D 01
Return Flash Memory Size 110
1D 02 nn
Select Flash Memory Sector to Download 111
1D 03 n
Real Time Recovery From Fault 92
1D 04 n
Real Time Status Transmission 94
1D 05
Real Time Printer Status Transmission 94
1D 06
Get Flash Firmware CRC Status 111
1D 07
Return Boot Sector CRC 111
1D 08
Return SRAM Size 89
1D 09
Return CPU Frequency 89
1D 0E
Erase All Flash Contents Except Boot Sector 112
1D 0F
Return Main Program Flash CRC 112
1D 10 n
Erase Selected Flash Sector 112