User manual
APOS Premium Printer Series User Manual Page 35 /136 Reference: FDE 3107312 Issue A
5 LIST OF CONTROL CODES
Control codes are non-printable characters or sequences of characters, which affect the subsequent
operation of the printer. For your convenience, they are grouped in logical sets of commands, which can be
used in the same context.
Code (Hexadecimal) Command Page
09
Horizontal Tab 49
0A
Print and Feed One Line 44
0C
Print and Return to Standard Mode 100
0D
Activate Carriage Return 44
10
Clear Printer 40
10 04 n
Real Time Status Transmission 96
10 05 n
Real Time Recovery From Fault 92
11 n1...nl
Print Raster Graphics 69
12
Select Double-Wide Characters 56
13
Select Single-Wide Characters 56
14 n
Feed n Print Lines 44
15 n
Feed n Dot Rows 45
16 n
Add n Extra Dot Rows 45
17
Print 46
18
Cancel Print Data in Page Mode 100
19
Perform Full Knife Cut 41
1A
Perform Partial Knife Cut 41
1B “BMP file”
Download BMP Logo 75
1B 07
Activate Internal Printer Buzzer 108
1B 0C
Print Data in Page Mode 101
1B 12
Select 90 Degree Counter-Clockwise Rotated Print 56
1B 14 n
Set Column 46
1B 16 n
Select Pitch (Column Width) 63
1B 20 n
Set Right-Side Character Spacing 49
1B 21 n
Select Print Mode 55
1B 24 n1 n2
Set Absolute Starting Position 50
1B 25 n
Select Character Set 66
1B 26 s c1 c2 n1 d1...nn dn
Define User-Defined Character Set 64
1B 27 m a2 a1 a0 d1 … dn
Write to User Data Storage 117
1B 2A m n1 n2 d1...dn
Select Bit Image Mode 70
1B 2D n
Select or Cancel Underline Mode 57
1B 2E m n rL rH d1 … dn
Print Advanced Raster Graphics 69
1B 32
Set Line Spacing to 1/6 Inch 46
1B 33 n
Set Line Spacing 47
1B 34 m a2 a1 a0
Read from User Data Storage 117
1B 3A 30 30 30
Copy Character Set from ROM to RAM 68
1B 3F n
Cancel User-Defined Character 66
1B 40
Initialize Printer 40