User manual

APOS Premium Printer Series User Manual Page 33 /136 Reference: FDE 3107312 Issue A
4.8 Configuration menu
Printers are generally shipped with all the functions and parameters pre-set at the factory. It is possible to
change settings for various printer functions and to run certain tests using the configuration menu. Selecting
functions or changing settings is done through the scrolling configuration menu feature. This feature prints
instructions on the receipt for selecting and changing any of the functions and parameters.
Caution: Be extremely careful changing any of the printer settings to avoid inadvertently changing other
settings that might affect the performance of the printer.
4.8.1 How to enter
- Push paper feed button
- Reset the printer and hold paper feed button.
4.8.2 How to adjust parameters
- After a self-test, the printer will enter in configuration menu.
Follow all the instructions on the scrolling menu.
- Press the Paper Feed Button to make the selections.
The instructions indicate whether to select something with a short click, a long click, or a series
of short clicks. Indicate Yes with a long click, No with a short click.
- Press and hold the Paper Feed Button for at least one second for a long click. Press the Paper
Feed Button quickly for a short click.
4.8.3 How to quit
At the end of your configuration, the printer asks for a reset and your configuration will be saved in
the EEPROM.
- Reset the printer