User manual

APOS Premium Printer Series User Manual Page 32 /136 Reference: FDE 3107312 Issue A
Communication Interface:
RX Buffer Size This indicates the size of the Receive buffer.
Interface Type RS232 or USB interface.
Parameters (RS232 only)
Baud Rate Baud rate Value.
Data Bits Number of data bits
Stop Bit(s) Number of stop bit(s)
Parity Type of parity to control frame validity
Flow Control Hardware or software handshaking.
Reception Errors Indicates which action is to be done when a wrong data is received.
Print Options:
Diagnostics This line indicates in which mode the board is:
- Off corresponds to normal operation
- Data Scope is used to print data all datas received from the host in
ASCII and HEX format.
Default LPI Default inter-lines spacing.
Carriage Return Select how to process a 0DH character received from the host.
Logo(s) defined current status = YES if at least one logo is defined
User Char(s) defined current status = YES if at least one character is defined
Revision Number: This is a 10 digit number that can be user defined
Codes Pages:
Default Indicates default internal code page selected upon reset.
Resident List of internal codes pages.
User Tallies:
Receipt Lines Indicates the number of text lines printed.
Knife Cuts Indicates the number of cuts performed.
Hours ON Indicates the number of hours the board has been turned ON.
Flash cycles Indicates the number of flash memory download cycles.
Knife Jams Indicates the number of times that a cutter jam appeared.
Cover Openings Indicates the number of cover opening/closing cycles.
Max temp reached Indicates the maximum temperature (in C degrees) reached by the
print head.
Head damaged Indicates if the print head is damaged or not.
Note: Tallies are updated every 1 hour or 1000 lines printed, whichever comes first.