User manual

APOS Premium Printer Series User Manual Page 31 /136 Reference: FDE 3107312 Issue A
4.7 Self test description
The self-test ticket can be printed by pressing both Reset and Paper feed button and releasing the Reset
button.
Here is the description of all the lines that you can read when you print a self-test.
Model Number: This is an 8 digit number fixed by Axiohm.
Serial Number: This is a 10 digit number fixed by Axiohm.*
*Serial number will be encoded as follows
:
First letter: C or D
Next two digits: year of production
Next two digits: week of production
Next 5 digits: incremental number that is reset every Monday morning.
Example: C or D030906623
=> Board manufactured week 9 of the year 2003, 6623rd product manufactured that week.
Boot Firmware:
Revision 4 digit revision number fixed by Axiohm.
CRC Boot code CRC.
Flash Firmware:
Revision 4 digit revision number fixed by Axiohm.
CRC Flash Main code CRC.
Hardware:
Flash Memory Size Total size of the flash memory.
Flash Logos/Fonts Flash memory allocated for logos or user defined fonts.
Flash User Storage Flash memory allocated for user data storage (ex: electronic journal).
SRAM Size Total size of the RAM Memory
CPU Clock Freq. Microprocessor Clock frequency.
Max Power Maximum average power drawn from power supply
Mechanism:
Paper Type Indicates the reference of the paper used matching with the mechanism.
Paper Width Indicated the paper width used.
Print Density Percentage of the nominal heating time value for specified paper.
Pre-Heating This mode is used to maintain print head temperature above 35°c when
enabled.
Max Speed Printer's top speed.
Knife Enable Knife Operation.
Partial Cut Indicate the number of steps done to perform a partial cut.