User manual

APOS Premium Printer Series User Manual Page 26 /136 Reference: FDE 3107312 Issue A
4.2 Choosing the proper location for your printer
The APOS printer may be installed in a variety of applications; but, to maintain optimum working
conditions from your unit, the following recommendations should be followed:
• Avoid dirty or dusty locations, or those with excessive heat or humidity
• Choose a stable level base or solid wall on which to mount the printer
• Make sufficient space around the printer to ensure comfort while using your printer, including
sufficient access to open the lid while changing paper.
4.3 Loading paper
It is extremely easy to load a new paper roll into the printer by following these simple steps:
 Open the cover and remove the old paper core;
 Drop the new roll into the reservoir so that it will rotate in the correct direction (i.e. so that the
emulsion side of the paper rests against the print head)
 Hold the front edge of the paper outside the main cavity at the front of the printer
 Close the printer cover
4.4 Light indicator
When the light is on continuously, the printer is ready to operate.
When the light is flashing, this signals that an error has occurred.
4.5 Connectors & cables
To reduce the electromagnetic emissions and susceptibility, all cables should be screened. If you are not
using cables supplied by Axiohm for this purpose, please ensure that your cables match the printer and are
rated at the appropriate voltage and current capacities.
All communication connectors should be SELV connectors in order to meet safety standards.
*Use of an inappropriate cable may seriously damage your printer!