User manual

APOS Premium Printer Series User Manual Page 132 /136 Reference: FDE 3107312 Issue A
RESET
EEPROM
Synopsis:
Reset EEPROM
Syntax:
ASCII:
US CR C L E
n
Decimal:
31 13 67 76 69
n
Hex:
1F 0D 43 4C 45
n
Operand:
n = security byte
Limit:
n = 0
Description: This command will reset the non-volatile memory configuration items to their default values.
Notes: This command must be sent while the printer is in its normal operating mode.
Once the configuration parameters are downloaded to the printer using this command, the printer must be
reset before they take effect.
This command is processed in boot mode only if the printer is running in normal mode, send first
command “Switch to Download Mode” 1B 5B 7D.
RESET EEPROM OPERAND DEFINITION
n
Decimal Hex Reset
0 00 Reset EEPROM