User manual

APOS Premium Printer Series User Manual Page 119 /136 Reference: FDE 3107312 Issue A
S
ET CUT TAG
The cut tag is a flag stored in memory, used to monitor the ticket transactions completion.
Send this command prior to a cut command, and then monitor the result with command Request Cut Tag
(1F 64)
Sets the cut tag to the value specified by n
ASCII
US c n
Hexadecimal 1F 63 n
Decimal
31 99 n
Value of n
Cut tag value
Range of n
0-255
R
EQUEST CUT TAG
Returns Cut Tag status.
ASCII
US d
Hexadecimal 1F 64
Decimal
31 100
Returns 2 bytes: Command ID followed by Cut Tag Status
Byte 1 = 64h
Byte 2 = Cut Tag Status
Once the Cut tag is set with command Set Cut Tag (1F 63 n), the Cut Tag Status returned depends on the
next cut cycle:
CUT TAG STATUS
situation Returned value
cut cycle is not complete 0
cut cycle is complete Value set with command 1F 63
n