User manual

APOS Premium Printer Series User Manual Page 101 /136 Reference: FDE 3107312 Issue A
P
RINT DATA IN PAGE MODE
Collectively prints all buffered data in the printing area.
After printing, the printer does not clear the buffered data and sets values for Select Print Direction in Page
Mode (ESC T) and Set Print Area in Page Mode (ESC W), and sets the position for buffering character
data.
ASCII
ESC FF
Hexadecimal 1B 0C
Decimal
27 12
Exceptions
This command is enabled only in page mode.
S
ELECT PAGE MODE
Switches from standard mode to page mode. After the Print and Return to Standard Mode (FF) command
or Select Standard Mode (ESC S) have completed printing, the printer returns to standard mode. The
developed data is deleted after being printed.
This command sets the position where data is buffered to the position specified by Select Print Direction in
Page Mode (ESC T) within the printing area defined by Set Print Area in Page Mode (ESC W).
This command switches the settings for the following commands (which values can be set independently in
standard mode and page mode) to those for page mode.
Set Right-Side Character Spacing (ESC SP)
Select 1/6-Inch Line Spacing (ESC 2)
Set Line Spacing (ESC 3)
It is possible only to set values for the following commands in page mode. These commands are not
executed.
Select or Cancel 90 Degree Clockwise Rotation (ESC V)
Set Counter Clockwise Rotation (ESC DC2)
Select Justification (ESC a)
Select or Cancel Upside-Down Printing (1B 7B).
Set Left Margin (GS L)
Set Print Area Width (GS W)
ASCII
ESC L
Hexadecimal 1B 4C
Decimal
27 76
Exceptions
The command is enabled only when input at the beginning of a line
The command has no effect if page mode has previously been selected.