User guide

A795 User Guide: Programming Supplement
Chapter 4: Programming commands
78
Transmit printer ID, remote diagnostics extension
ASCII GS I @ n
Hexadecimal 1D 49 40 n
Decimal 29 73 64 n
Values of n: Refer to table
The command performs the remote diagnostic function specified by n as described in the following table.
Value of n
ASCII Hex Dec Remote diagnostic item Function
Space 20 32 Serial #, 10 digit ASCII Write to NVRAM Example, send 14 bytes to printer:
GS I @ 0x20 1234567890
! 21 33 Serial # Write to NVRAM, and print on receipt to verify
Example, send 14 bytes to printer:
GS I @ ! 1234567890 This will print on receipt:
Serial # written: 1234567890
# 23 35 Serial # Return Serial #, preceded by n to identify Printer
returns 12 bytes in above example: #1234567890<CR>
$ 24 36 Class/model #, 15 digit ASCII Write to NVRAM
% 25 37 Class/model # Write to NVRAM, and print on receipt to verify
‘ 27 39 Class/model # Return Class/model #, returns 17 bytes
+ 2B 43 Boot firmware part #, 12 digit ASCII Return Boot firmware part #, returns 14 bytes
/ 2F 47 Boot firmware CRC, 4 digit ASCII Return Boot firmware CRC, returns 6 bytes
3 33 51 Flash firmware part #, 12 digit ASCII Return Flash firmware part #, returns 14 bytes
7 37 55 Flash firmware CRC, 4 digit ASCII Return Flash firmware CRC, returns 6 bytes
Ç 80 128 Receipt lines tally, Write to NVRAM Example, send 12 bytes to printer:
8 digit ASCII numeric, GS I @ Ç00010000 To set receipt lines tally to 10,000
max 99,999,999
ü 81 129 Receipt lines tally Write to NVRAM, and print on receipt to verify
Example, send 12 bytes to printer:
GS I @ ü00010000 This will print on receipt:
Receipt tally written: 10,000
é 82 130 Receipt lines tally Clear receipt lines tally to 0
â 83 131 Receipt lines tally Return receipt lines tally, preceded by n to identify
Printer returns 10 bytes in above example:
â00010000<CR>
ä 84 132 Knife cut tally, 8 digit ASCII numeric, Write to NVRAM
max 99,999,999
à 85 133 Knife cut tally Write to NVRAM, and print on receipt to verify