User guide

A795 User Guide: Programming Supplement
Chapter 4: Programming commands
77
Transmit printer ID
ASCII GS I n
Hexadecimal 1D 49 n
Decimal 29 73 n
Value of n: 1, 49 = Printer model ID
2, 50 = Type ID
3, 51 = ROM version ID
4, 52 = Logo Definition
Transmits the printer ID specified by n as follows:
n Printer ID Specification ID
(Hexadecimal)
1, 49 Printer model ID Axiohm A795 0x24
2, 50 Type ID Installed options Refer to next
table
3, 51 ROM version ID ROM version 0x00
4, 52 Logo definition Logo definition Refer to table
below
n = 2 or 50: Type ID
Type ID (n = 2)
Bit Off/On Hex Decimal Function
0 Off 00 0 No two-byte character
code installed.
On 01 1 Two-byte character
code installed.
1 Off 00 0 No knife installed.
On 02 2 Knife installed.
2 - - - Undefined.
3 - - - Undefined.
4 Off 00 0 Not used. Fixed to Off.
5 - - - Undefined
6 - - - Undefined
7 Off 00 0 Not used. Fixed to Off.
n = 4 or 52: Logo Definition
Bit Off/On Hex Decimal Function
0 Off 00 0 No logo downloaded
(SRAM or Flash)
On 01 1 Logo downloaded
(SRAM or Flash)
1-7 Off 00 0 Not Used. Fixed to Off.
Transmits the printer ID specified by n. This command is a
batch mode command; that is, the response is transmitted
after all prior data in the receive buffer has been
processed. There may be a time lag between the printer
receiving this command and transmitting the response,
depending on the receive buffer status.