User guide

A795 User Guide: Programming Supplement

Chapter 3: Programming the Printer

Print zones

Print zones for 80-mm paper

Specifications of print zone for 80 mm paper:

• 576 dots (addressable) @ 8 dots/mm,

centered on 80 mm

• Standard mode: minimum margins:

2.0 mm (.079 inches)

• Top margin to manual tear-off:

17.8 mm (0.70 inches)

• Top margin to knife cut:

19.0 mm (0.75 inches)

Cut Edge

44 Standard Columns = 71.5 mm (2.815 in.)

56 Compressed Columns = 70 mm (2.756 in.)

Cut Edge

Paper Width = 80 mm (3.15 in.)

Top Margin, 17.8 mm (.70 in.) Minimum

Printable Zone, 576 Dots = 72 mm (2.835 in.)

Nominal Margins, 4 mm (0.157 in.)

Note: The application centers 44 standard character cells (13 x 24 dots),

or 56 compressed character cells (10 x 24 dots), or 576 addressable bits

of graphics across an 80-mm wide receipt. Minimum print line height is

24 dots for text or graphics. Standard print line spacing is 27 dots

(i.e. 3 extra row dots).

The A795 adds a 27 dot high font, so standard print spacing is 30 dots.