User guide

A795 User Guide: Programming Supplement
Appendix A: Commands by hexadecimal code
111
Appendix A:
Commands listed by hexadecimal code
By command code
Note: Bold commands are new two-color, (ColorPOS ™) commands.
Code (hexadecimal) Command Page
09 Horizontal tab 46
0A Print and feed paper one line 43
0C Print and return to standard mode 95
0D Print and carriage return 43
10 Clear printer 36
10 04 n Real time status transmission (DLE sequence) 84
10 05 n Real time request to printer (DLE sequence) 85
12 Select double-wide characters 52
13 Select single-wide characters 52
14 n Feed n print lines 43
15 n Feed n dot rows 43
16 n Add n extra dot rows 44
17 Print 44
18 Cancel print data in page mode 95
19 Perform full knife cut (or code 1B 69) 36
1A Perform partial knife cut (or code 1B 6D) 37
1B (+*.BMP) Download BMP logo (where +*.BMP is the data from the file, not the filename.) 63
1B 07 Generate tone 37
1B 0C Print data in page mode 95
1B 12 Select 90 degree counter-clockwise rotated print 52
1B 14 n Set column 46
1B 16 n Select pitch (column width) 53