Instruction manual

Chapter 6: Programming Information A794 Owner’s Guide
December 199982
Select Print Mode
ASCII ESC ! n
Hexadecimal 1B 21 n
Decimal 27 33 n
Value of n: Pitch selection (standard, compressed, double high, or double wide.)
Value of
n
Bit
1
Function 0 1
Bit 0 Pitch
2
(See chart below)
Standard Pitch Compressed Pitch
Bit 3 Emphasized Mode Canceled Set
Bit 4 Double High Canceled Set
Bit 5 Double Wide Canceled Set
Bit 7 Underlined Mode Canceled Set
1
Bits 1, 2 and 6 are not used.
2
Standard and compressed pitch cannot be used together in the same line.
Default: 0 (for bits 0, 3, 4, 5, 7)
This command and Select Pitch (Column Width) command (1B 16 n) affect Pitch
Selection.
Pitch Columns,
80 mm Paper
Columns,
82.5 mm Paper
CPI
Standard 44 49 15.6
Compressed 56 64 20.3
Selects the Print Mode: standard, compressed, emphasized, underlined, double high, or
double wide.
Exceptions
Refer to the above table for exceptions.
Related Information
See the Print Specifications Guide for a description of standard and compressed character
pitches.
The bits in this command perform the same function as the standalone functions:
1B 16 n Select Pich
1B 45 n Emphasized
1B 47 n Double Strike
12 Double Wide
13 Single Wide
1B 2D n Underline