Instruction manual

Chapter 6: Programming Information A794 Owner’s Guide
December 199970
Print
ASCII ETB
Hexadecimal 17
Decimal 23
Prints one line from the buffer and feeds paper one line. Executes LF on receipt.
Related Information
This command is recognized in A793 Emulation and A794 Native Mode, ignored in
TM-T88 Emulation.
Set Line Spacing to 1/6 Inch
ASCII ESC 2
Hexadecimal 1B 32
Decimal 27 50
Default: 3.33 mm (0.13 inch)
Sets the default line spacing to 4.25 mm (1/6 of an inch).
Set Line Spacing
ASCII ESC 3 n
Hexadecimal 1B 33 n
Decimal 27 51 n
Value of n: n/406 inch in A794 Native Mode
n/360 inch in A793 Emulation Mode
n/203 inch in TM-T88 Emulation Mode
Range of n: 0-255
Default: 3.37 mm (0.13 inch)
Sets the line spacing to n/16 mm (n/406 inch).
The minimum line spacing is 8.5 lines per inch. The line spacing equals the character
height when n is too small.
If the Set Horizontal and Vertical Minimum Motion Units command (1D 50) is used to
change the horizontal and vertical minimum motion unit, the parameters of this
command (Set Line Spacing) will be interpreted accordingly.
Related Information
For more information, see the description of the Set Horizontal and Vertical Minimum
Motion Units command in this document.