Instruction manual

A794 Owner’s Guide Chapter 6: Programming Information
December 1999 55
By Function
All items in BOLD are new or have additional functionality when compared to the
A793.
Printer Function Commands
Code (Hexadecimal Command Page
10 Clear Printer 61
19 Perform Full Knife Cut 61
1A Perform Partial Knife Cut 62
1B 07 Generate Tone 62
1B 3D n Select Peripheral Device (for Multi-Drop) 62
1B 40 Initialize Printer 63
1B 63 33 n Select Paper Sensors to Output Paper End
Signals (Parallel Only)
64
1B 63 34 n Select Sensors to Stop Printing 65
1B 63 35 n Enable or Disable Panel Buttons 65
1B 69 Perform Full Knife Cut 61
1B 6D Perform Partial Knife Cut 62
1B 70 n p1 p2 Generate Pulse to Open Cash Drawer 66
1D 56 m Select Cut Mode and Cut Paper 66
1D 56 m n Select Cut Mode and Cut Paper 66
1F 74 Print Test Form 67
Vertical Positioning and Print Commands
Code (Hexadecimal Command Page
0A Print and Feed Paper One Line 68
0D Print and Carriage Return 68
14 n Feed n Print Lines 68
15 n Feed n Dot Rows 69
16 n Add n Extra Dot Rows 69
17 Print 70
1B 32 Set Line Spacing to 1/6 Inch 70
1B 33 n Set Line Spacing 70
1B 4A n Print and Feed Paper 71
1B 64 n Print and Feed n Lines 71
1D 50 x y Set Horizontal and Vertical Minimum Motion
Units
71