Setup guide

4
*** A760 – Diagnostics Form
8
***
•
•
•
Boot Firmware
Revision : V1.07
CRC : 7CBA
P/N : 189-7600131B
Flash Firmware
Revision : V1.14
CRC : 9B4B
P/N : 189-7600143C
H/W parameters
•
Flash Logos/Fonts : 64 kbytes
9
Flash User Storage : 64 kbytes
9
Flash Journal Size : > 0 kbytes
10
•
•
•
Knife : Enabled
MICR : Enabled
Comm. Interface
•
Interface Type : RS232/USB
Parameters
Baud Rate : 57600
Data Bits : 8
Stop Bit : 1
Parity : None
Flow Control : DTR/DSR
Reception Errors : Ignore
Alternate DTR/DSR : Disabled
•
Resident Code Pages : 437, 850, … etc.
•
•
•
Diagnostics : OFF
Default Font : Standard
Printer Mode : A760 Native Mode
Printer ID Mode : A760 Native ID
Default LPI : 7.52
Carriage Return : Used as Print Cmd.
Resident Font Size : Standard
Slip Position Option : Disabled
Slip Eject Option : Disabled
Wait for slip paper : Forever
•
•
•
8
See the A760 “User Guide”, page 22-23 to print a complete list of hardware and general printer
parameters.
9
Set by Axiohm to permit maximum Journal size.
10
Each 64 kbyte block provides approximately 1500 lines of Journal storage.