Setup guide

2
Introduction
The Wrenchman 10K120 interface enables the use of an Axiohm A758 or A760
thermal printer with the NCR 2127 POS system.
Advantages
• Electronic Journal
1
• MICR capability
2
• Print up to 4 Graphic Logos per receipt
• 2-Color Logos
3
• USB port for future use
• Easier receipt paper loading
• Faster and quieter printing
• Lower maintenance costs
Installation and Setup
Setup of the Axiohm printer
• Unpack the printer and accessories.
• Locate the Setup Guide Chapter in the“Owner’s Guide”
4
and follow the steps
to setup and install the printer.
5
• Verify that the settings on the “Diagnostic Form” are the same as below.
6
1
The 10K120 interface has Flash memory to support Electronic Journal, when using the A758 printer.
2
Enabled by the Dumac 2127 register user exit.
3
Available only on the A760 printer.
4
Axiohm’s “Owner's Guides” are available online at www.axiohm.com.
5
Power the printer and check that the printer’s green light is ON.
6
See the Printer Configuration section in Using the Printer chapter, pages 34-41 in the "Owner’s Guide",
January 2001, to change settings. Incorrect settings will result in unpredictable printing and operation.