Setup guide

14
10K120 Interface Configuration Item Tag Table
Continued
Item PLU No. Description
View Journal 66394700129 Prints out the last transactions journal data.
Each scan will print out one transaction
previous to the last journal transaction
printed.
Electronic Journal Operation
Print a Electronic Journal capacity report
• Scan or enter the PLU number of the "Print EJ Report" configuration tag.
The EJ report will also print out at power-on and whenever the new settings
are stored in the 10K120 interface.
Print recent Electronic Journal transaction data
• If enabled via the “J View Key ON” function, make sure that the keylock is in
the “Reg” position and press the journal feed key.
The printer will print out a copy of the electronic journal data of the last
transaction. If more data is needed, each press of the journal feed key will
move back one transaction in the journal storage from the last journal
transaction printed and print that transaction. To finalize the journal view
printout, the receipt feed key can be pressed.
Print and erase Journal data
• If enabled via the "S Key Erase ON" function, turn the keylock to the "Super"
position and press the journal feed key.
• If set via the "P Key Erase ON" function, turn the keylock to the "Prog"
position and press the journal feed key.
• Scan the "Print and Erase EJ" tag or enter the respective PLU number.
If the above procedures do not work, verify that the associated function is
enabled by looking at the report produced from scanning the "Print Config
Report" tag or entering the associated PLU number.
Erase the Journal data
• Scan the "Erase EJ Data" tag or enter the associated PLU number.