Setup guide

13
10K120 Interface Configuration Item Tag Table
Continued
Item PLU No. Description
Power up Message
OFF
66394700119 Disables the 10K120 firmware information
printout when the 2127 register is powered
on, the cable is inserted into a powered 2127
register, or when the printer power is cycled.
Print Diagnostics 66394700120 Prints the Axiohm configuration page that
shows the settings of the Axiohm printer.
Load Configuration 66394700121 Loads the configuration values stored in the
cable and activates them.
Quickset Defaults 66394700122 Sets all the configuration parameters to their
default settings.
These settings are:
Electronic Journal Disabled
Power-up Report Enabled
MICR Reader Disabled
Quickset 1 66394700123 Sets all the configuration parameters to
values for electronic journal but not MICR.
These settings are:
Electronic Journal Enabled
S Key Journal Erase Disabled
P Key Journal Erase Enabled
Journal Report Key Enabled
Power-up Report Enabled
MICR Reader Disabled
Quickset 2 66394700124 Sets all the configuration parameters to
values for MICR but not electronic journal.
These settings are:
Electronic Journal Disabled
Power-up Report Enabled
MICR Reader Enabled
MICR Data Format Long
Quickset 3 66394700125 Sets all the configuration parameters to
values for MICR and electronic journal.
These settings are:
Electronic Journal Enabled
S Key Journal Erase Disabled
P Key Journal Erase Enabled
Journal Report Key Enabled
Power-up Report Enabled
MICR Reader Enabled
MICR Data Format Long
Save Configuration 66394700126 Saves all the currently set configuration
parameters in permanent memory and resets
the cable.
18
18
The Save Configuration Tag applies to configuration items 106 through 119 in the Configuration Item
Tag Table. The numbers are the last three digits of the item.