Instruction manual

A758 Owner’s Guide Chapter 5: Techical Spcifications
September 1999 62
Optional Features
Paper Cutter
Rotary partial cut knife leaves 5.0 mm (0.2 inch) uncut on left
edge.
Slip Table Kits
Extends Slip Table 38 mm (1.5 inches) (shortened) or 76 mm
(3.0 inches) (standard) in front (standard on MICR and flip).
MICR Reader
Integrated into the slip station.
Reads MICR checks oriented for validation on the back of the
check, and communicates the character string to the host
computer.
Reads E13B and CMC7 MICR Fonts (Auto discriminates).
Check Flip
Error and fraud prevention feature.
Turns validated checks over for printing on the face of the
check.
Remote Power
Supply
55W standard
75W available
Auto-Ranging input
24Vdc output
Interface daughter
PCB’s
RS232, 9 pin connector
RS232, 25 pin connector
Parallel