Instruction manual

A758 Owner’s Guide Chapter 3: Using the Printer
September 1999 29
Testing the Printer
The Configuration Menu allows you to set general printer parameters. The test
prints a list of various printer settings and partially cuts the paper if a knife is
installed. The test printouts may vary depending on the printer model. The
printout may be useful to a service representative if there is a problem. To change
the default settings, enter the Configuration Menu as instructed on the bottom of
the test printout. If something appears to be wrong with the test printout (such as
missing or faded text), see the troubleshooting section in this document.
1. To run the test, either:
a. Open and close the receipt cover while holding down the Paper Feed
Button.
OR
b. Press the Paper Feed Button and the Reset Button at the same time.
2. When the printer begins printing let go of the Paper Feed Button.
Caution:
Be extremely careful changing any of the printer settings to avoid
inadvertently changing other settings that might affect the performance of the
printer.
Press the Paper Feed Button the number of clicks for the printer settings you
want.
Note:
Press the Paper Feed Button for at least one second to validate the
selection.
Configuration Menu
and
Print Test
samples (show approximately 60% of size).