Instruction manual

A758 Owner’s Guide Chapter 3: Using the Printer

September 1999 26

Slide the check straight forward into the printer until it stops. The green Slip-

in LED on the front of the printer comes on.

IMPORTANT:

Hold the check to the right, against the Check Guide and

release it as soon as the printer begins to run.

Follow the instructions on the host computer to complete the MICR process:

When instructed by the host, the check is fed into the printer, read and

backed out to a position ready for endorsement, if desired.

With the optional check-flip feature, the check is fed into the printer,

verified, fed up into the check flip mechanism, flipped, fed back into the

printer, printed on the front and released.

Note:

If the terminal indicates an incorrect read of the MICR:

♦

Remove the check.

♦

Reinsert the check, ensuring instructions 1 through 3 above

are followed.

Only remove the check when it is fully released by the printer.

Continue to follow the instructions from the host computer to finish the

transaction.