Instruction manual

A758 Owner’s Guide Chapter 3: Using the Printer
September 1999 25
Verifying and Validating Checks
If the printer has the optional MICR check reader, checks are verified and then
validated. If the printer also has the optional check flip feature, the printer is able
to flip the check over and print on the front of the check.
Note: To ensure that checks are properly verified and validated, they must be free of
folds and wrinkles and inserted correctly into the MICR printer. Smooth a
wrinkled or folded check for best performance.
Extended
Slip Table
Slip
Tab le
Check
Guide
Green
Slip-in LED
First Line of
Print Guide
Check Orientation - Face down
ENDORSE HERE
MEMO
To verify and validate a check:
1. Place the check, face down on the Slip Table, with the bottom edge of the
check to the right. Move the check to the right until it aligns against the
Check Guide.