Instruction manual

A758 Owner’s Guide Chapter 2: Setup Guide

September 1999 15

Putting In the Ribbon Cassette

Note:

You must use an approved Axiohm ribbon cassette with the check flip

option to prevent jamming or other ribbon problems.

Unwrap and tighten the ribbon by turning the knob on the cassette in the

direction of the arrow.

Caution:DO NOT

remove the mylar shield.

Ribbon

Cassette

Knob

Mylar

Shield

Front

Cover

Ribbon

Cassette

(Shown in

Position)

Printhead

Open the printer’s front cover, position the ribbon cassette onto the carriage,

making sure the ribbon is underneath the printhead.

Snap the cassette into place and close the front cover.