Instruction manual

A758 Owner’s Guide Chapter 7: Programming Guide
September 1999 197
Check Flip Command
Check Flip Command
ASCII
:ESC w F
Hexadecimal
: 1B 77 46
Decimal:
27 119 70
Causes a check on the slip table to be fed into the printer, flipped and left with
the trailing edge of the check in the slip feed rollers. Prior to the flip, the check is
measured to see that it is of an appropriate size (see Chapter 4: Media and
Supplies, Forms Specification) to be flipped. If not, the check is fed back to the
user.
Exception:
This command is available only in A758 Native Mode.