Instruction manual

A758 Owner’s Guide Chapter 7: Programming Guide
September 1999 187
Execute Macro
ASCII
:GS ^
r t m
Hexadecimal
:1D 5E
r t m
Decimal:
29 94
r t m
Value of
r
:
The number of times to execute the macro.
Value of
t
:
The waiting time for executing the macro.
Executes a macro. After waiting for a specified period the LED indicators blink
and the printer waits for the Paper Feed Button to be pressed. After the button is
pressed, the printer executes the macro once. The printer repeats this operation
the number of specified times.
When the macro is executed by pressing the Paper Feed Button (
m
= 1), paper
cannot be fed by using the Paper Feed Button.
Formulas:
The waiting time is
t
x 100 msec for every macro execution.
m
specifies macro executing mode when the LSB (Least significant bit)
m
= 0
The macro executes
r
times continuously at the interval specified by
t
when the
LSB (Least significant bit) of
m
= 1.
Exceptions:
If this command is received while a macro is being defined, the macro definition
is aborted and the definition is cleared.
If the macro is not defined or if
r
is 0, nothing is executed.
This command is available in A758 Native Mode only.