Instruction manual

A758 Owner’s Guide Chapter 7: Programming Guide
September 1999 181
Select Standard Mode
ASCII
:ESC S
Hexadecimal
:1B 53
Decimal:
27 83
Switches from Page Mode to Standard Mode. In switching from Page Mode to
Standard Mode, data buffered in Page Mode are cleared, the printing area set by
Set Print Area in Page Mode (1B 57) is initialized and the print position is set to
the beginning of the line.
This command switches the settings for the following commands (the values for
these commands can be set independently in Standard Mode and Page Mode) to
those for Standard Mode:
♦
Set Right-Side Character Spacing (1B 20)
♦
Select 1/6 Inch Line Spacing (1B 32)
♦
Set Line Spacing (1B 33)
Standard Mode is automatically selected when power is turned on, the printer is
reset, or the Initialize Printer command (1B 40) is used.
Exceptions:
This command is effective only in Page Mode.