Instruction manual

A758 Owner’s Guide Chapter 7: Programming Guide
September 1999 147
Values
:
Receipt Station
Value of
m
Mode
No. of Dots (Vertical) No. of Dots
(Horizontal)
Number of
Dots/Line
0 8 Dot Single Density 8 (68 DPI) 0 – 288
(101 DPI)
8 x 288
1 8 Dot Double Density 8 (68 DPI) 0 – 576
(203 DPI)
8 x 576
32 24 Dot Single Density 24 (203 DPI) 0 – 288
(101 DPI)
24 x 288
33 24 Dot Double Density 24 (203 DPI) 0 – 576
(203 DPI)
24 x 576
Slip Station
Value of
m
Mode
No. of Dots**
(Vertical)
No. of Dots
(Horizontal)
Number of
Dots/Line
0 7 Dot Single Density 7 (72 DPI) 330 (69.5 DPI) 7 x 330
1* 7 Dot Double Density 7 (72 DPI) 660 (139 DPI) 7 x 660
32, 33 Not Available on Slip
In single density, one byte (7 dots) is printed in each full dot column; in double
density, one byte is printed in each half/full dot column.
*Adjacent horizontal dots (overlapping dots) are not printed on the slip.
**In A758 Native Mode. There are 8 vertical dots.
Value of
n
(8-Dot
Single-Density Mode)
Value of
n
(24-Dot
Single-Density Mode)
Value of
d
n1 + (256 x n2) 3 x [n1 + (256 x n2)] Number of Bytes of Data*
*Printed left to right (8-dot mode); Printed down then across (24-dot mode).
Formulas:
8 Dot Single Density
n
1 + (256 x
n
2)
24 Dot Single Density 3 x [
n
1 + (256 x
n
2)]
(Select Bit Image Mode—continued on the next page)