Instruction manual
A758 Owner’s Guide Chapter 2: Setup Guide
September 1999 9
Choosing a Location
178 mm
(7.0 in.)
280 mm
(11.0 in.)
229 mm (9.0)
264 mm (10.4 in.)
347 mm (13.7 in.)
Extended
Slip Table
Receipt
Cover
The A758 printer takes up relatively little counter space and may be set on or
near the host computer. With the RS-232C interface, you can place the printer up
to 50 feet from the host computer and power supply.
Place the printer on a level surface, and make sure there is enough room to open
the receipt cover to change the paper and to open the front cover to change the
impact printer’s ribbon cassette. Leave several inches around the printer for
connecting and accessing the cables.
If the printer has an optional Magnetic Ink Character Recognition (MICR) check
reader installed, you may need to make additional adjustments to the printer’s
location. Because devices such as CRT monitors or large metal surfaces affect the
printer's magnetic field, they can cause intermittent check reading errors.