Instruction manual

A758 Owner’s Guide Chapter 7: Programming Guide
September 1999 117
Select Sensors to Stop Printing
ASCII
: ESC c 4
n
Hexadecimal
: 1B 63 34
n
Decimal:
27 99 52
n
Value of
n
:
Bit of
n
Bit Function
Bit 0, 1 Stop Receipt on Receipt Low
Bit 4 Stop Slip if Trailing Edge Uncovered
Bit 5 Stop Slip if Leading Edge Uncovered
Default:
0
Determines which sensor stops printing on the respective station. The command
does not affect the paper out sensor on the receipt station, which will
automatically stop the printer when the paper is depleted.
Enable or Disable Panel Buttons
ASCII
: ESC c 5
n
Hexadecimal
: 1B 63 35
n
Decimal:
27 99 53
n
Value of
n
:
0 = Enable
1 = Disable
Default:
0 (Enable)
Enables or disables the Paper Feed Button. If the last bit is 0, the Paper Feed
Button is enabled. If the last bit is 1, the Paper Feed Button is disabled.
Related Information:
Functions that require using the Paper Feed Button (except for the Execute Macro
[10 5E] command) cannot be used when it is disabled with this command.
Enable or Disable Online Switch
ASCII
: ESC c 6
n
Hexadecimal
: 1B 63 36
n
Decimal:
27 99 54
n
Value of
n
:
0, 1
Since the A758 does not have an Online Switch, this command is ignored.