User manual

A630/A631/A632 Printer Series User Manual Page 26 / 63 Reference: FDE 3106894 Issue F

3.5.2.5 Centronics timing

3.5.2.6 Bluetooth

interface

Uses internal antenna, therefore there is no communication interface connector for Bluetooth

model.

The A631 Bluetooth

model supports the Serial Port Profile, and it can be used as a serial printer, with

Bluetooth

being used in a cable replacement configuration, for example.

The interface is compatible with Bluetooth

standard V1.1.

Each printer has a specific User Name that will allow to address an identified printer amongst a batch.

This User Name is: A630- + "printer serial number".

A password is necessary to pair and access to the service and enable the connection.

This password is: 631200.

The maximum communication throughput is 115200 Baud.

The printer automatically goes in power save mode after 5 minutes without activity, and switches Off the

Bluetooth

link.

The printer needs to be manually turned On using the power On/Off button for Bluetooth

communication to be re-established.

3.6 Self test description

Note

: Before printing a first ticket on the portable version, you have to load the battery (see above)

To print a self test ticket, follow the next instructions:

• If the printer is "On" set it "Off" by pushing the "ON/OFF" button.

• Activate both the Paper feed button and the ON/OFF button.

• Keep the paper feed button pressed and release the ON/OFF button.

• When the ticket starts, release the Paper feed button.

When resetting the printer, all running operations are stopped and all information sent before resetting will

be lost.

Data

/Strobe

/Ack

Busy

time interval Min Max

a data setup time 0,5

b strobe pulse width 0,5 500

c data hold time 0,5

e ack pulse w idth 2,5

all times in µs