User manual

A630/A631/A632 Printer Series User Manual Page 18 / 63 Reference: FDE 3106894 Issue F
3.1.6 Connectors (Plugging and connecting your printer)
Note : Connecting the interface is not applicable for Bluetooth
TM
versions.
3.1.6.1 Installing the battery and connecting the interface on portable version
The battery is set underneath the printer as shown here after and clipped to the printer: push to clip, pull to
unclip.
A locating pin will prevent you from inserting the battery in the wrong direction.
If you feel any resistance when trying to clip the battery into place, verify that it is in the proper direction.
If not, turn the battery and try again.
Take care not to apply too much pressure while inserting the battery, as you might break the locating pin.
Set your interface cable at the rear of the printer to the connector shown here after.
contacts
set & clip
Connection for
RS232
communication
cable