User manual

A630/A631/A632 Printer Series User Manual Page 11 / 63 Reference: FDE 3106894 Issue F
Note : The power supply should be a “SELV” type in order to meet safety standards.
2) With Battery Pack
External, replaceable battery pack, AXIOHM reference 3106282 (Kit reference: 3106880).
Approximately 80m of text (25% pts on at 25°C) can be printed with a full battery.
It will take 1.30 hours (without printing) to totally charge the battery via the printer.
A optional power saving ("Power Mode") feature automatically switches the printer off when the interface
has not been used for 5 minutes period (Power mode = ON).
Caution : Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s
instructions.
Specifications: Nickel-Cadmium rechargeable
Nominal Voltage
6.0 V
Rated Capacity
1200 mAh
Average Weight
182 g (6.4 oz.)
Maximum Volume
78 cm
3
( 4.8 in
.3
)
Terminals
Flat
Operating Temperature Range
-20 °C to +50 °C
(-4 °F to 122 °F )
Important : AXIOHM cannot guarantee the correct operation of the printer if another power supply is
used other than an AXIOHM power supply.
Remark: power supply 50 VA
• INPUT : 230 VAC 50Hz
• OUTPUT : 9VDC 2500mA
Regulations : CE UL CSA GS