Specifications

Appendix E: Commands 7193 Service Guide
August 199870
Graphics Commands
These commands print graphics data and are listed in numerical order of their Hex codes.
Graphics Commands
Hex Code Command
1B 24 etc.
Set Absolute Starting Position
1
1B 2A m etc.
Set Bit Image Mode
1B 4B etc. Single-Density Graphics
1B 4C etc.
1B 59 etc.
Double-Density Graphics
1D 2A etc. Define Downloaded Bit Image
1D 2F m
Print Downloaded Bit Image
1
This printer function command is also used in graphics to emulate an Epson
LQ-950™ printer to handle graphics output from word processing programs.
Printer Status Commands
These commands send printer status information to the host system and are listed in
numerical order of their Hex codes.
Printer Status Commands
Hex Code Command
1B 75 0 Transmit Cash Drawer Status (RS-232C Only)
1B 75 n
Request Alternate Status (Parallel Only)
1B 76 Transmit Printer Status (Not Implemented for Parallel)
1D 49 n
Transmit Printer ID
1D 61 n
Enable/Disable Automatic Status Back
1D 72 n
Transmit Status
Real Time Commands
These commands provide an application interface to the printer even when the printer is
not handling other commands (RS-232C communication interface only) and are listed in
numerical order of their Hex codes.
Real Time Commands
Hex Code Command
10 04 n
Real Time Status Transmission, DLE Sequence
10 05 n
Real Time Request to Printer, DLE Sequence