Specifications

Chapter 2: Installing the Printer 7193 Service Guide
August 199814
Turning On the Printer
Note: On models receiving power from a power supply, the printer receives power when
the power supply is on even if the printer is off-line. To remove power from the printer,
press the On Line button to take the printer off-line (On Line is off), then unplug the power
supply power cord from the outlet.
1. Press the On Line button on the operator panel to put the printer on-line.
The printer goes through a self-test routine to ensure everything is working, then
“beeps.” The On Line light (green) comes on indicating the printer is on-line. If the On
Line light does not come on, or either the On Line light or Paper Out light flashes, see
“Troubleshooting” later in this book.
2. Press the On Line button again to take the printer off-line.
Note: On models receiving power from the host computer (integrated), the printer
receives power when the communication cable has been connected and the host turned on.
The printer then goes through a self-test routine to ensure everything is working, then
“beeps.” There is no On Line button or light.
When the printer has completed its “startup” cycle it is ready to receive data. If the Paper
Out light flashes, see “Troubleshooting” later in this book.