Specifications

7193 Service Guide Chapter 2: Installing the Printer
August 1998 5
Chapter 2: Installing the Printer
What Is in the Box?
The following items are packed in the shipping box (printers shipped in bulk may not
include all of these items):
•
Printer enclosed in a plastic bag and foam pack
• Thermal paper roll (inside printer)
• Test printout protecting the printhead (inside printer)
• Power supply with attached cable to printer (only if ordered with the printer)
• Power cord—from power supply to outlet (only if ordered with the printer)
• Wall-mount holder for the power supply with screws and wall anchors (only if
ordered with the power supply)
•
Tie-wrap for cable
• Installation report card (please complete this form and return to NCR)
• 7193 Thermal Receipt Printer: Setup and User’s Guide
These items may be ordered as options from NCR and will be shipped separately:
• Wall-mount kit for the printer
• Communication cable (from host computer to printer)
• Cash drawer with cables
Removing the Printer
1. Remove the printer from the foam pack and open the receipt cover by pulling up on
the front left corner.
2. Remove the paper roll and test printout from inside the printer.
3. Save all packing materials for future storing, moving, or shipping the printer.
4. Complete the Installation report card and send it to NCR.
Repacking the Printer
1. Protect the printhead by placing a piece of receipt paper between the receipt cover and
the printhead.
2. Place the printer in the plastic bag and foam pack.
3. Place the packed printer in the box and secure the box with packing tape.
4. If you are sending the printer directly to NCR for repair, call your NCR-authorized
service representative for instructions on where to send the printer.
Be prepared to answer questions concerning shipping and billing.