Specifications

7193 Owner’s Guide Chapter 6: Commands

August 1998 49

Prints one line from the buffer and feeds paper one line.

Hexadecimal Decimal ASCII

17 23 ETB

Full Knife Cut

This command is implemented the same as Partial Knife Cut (1A/1B 6D).

Hexadecimal Decimal ASCII

1B 69

27 105

ESC i

Partial Knife Cut

Partially cuts the receipt, leaving .20 inch (5 mm) of paper. The length of the cut can be

changed through the DIP switches. See “Setting Partial Cut Distance” in chapter 4. The cut

edge is 108 dot rows or .71 inch (18 mm) above the print station. It is valid only at the

beginning of a line.

Hexadecimal Decimal ASCII

1B 6D

27 109

SUB

ESC m

Generate Tone

Generates an audible tone.

Hexadecimal Decimal ASCII

1B 07 27 7 ESC BEL

Set Column

Prints the first character of the next print line in column n. It must be sent for each line not

printed at column one. The value of n is set to one after each line. It cannot be used with

Single- or Double-Density graphics.

Hexadecimal Decimal ASCII Value of n

1B 14 n 27 20 n ESC DC4 n

1-44 (Standard Pitch)

1-56 (Compressed pitch)

Set Character Right-Side Spacing

This command is not implemented and is ignored if received.

Hexadecimal Decimal ASCII

1B 20 n 27 32 n ESC (SPACE) n