Specifications

7193 Owner’s Guide Chapter 6: Commands
August 1998 45
Print Characteristics Commands
These commands control what the printed information looks like and are listed in
numerical order of their hexadecimal codes.
Print Characteristics Commands
Hexadecimal Code Command Page
12 Select Double-Wide Characters 56
13 Select Single-Wide Characters 57
1B 12 Rotate Characters Counter-Clockwise 57
1B 16 n
Select Pitch (Column Width) 57
1B 21 m
Set Print Mode 57
1B 25 n
Select Character Set 58
1B 26, etc. Define User-Defined Character Set 58
1B 3A 0 0 0 Copy Character Set From ROM to RAM 59
1B 3F n
Cancel User-Defined Character 59
1B 52 n
1B 74 n
Select Character Code Table 59
1B 56 n
Set or Cancel Rotated Characters Clockwise 59
1B 7B n
Set or Cancel Upside-Down Characters 59
Graphics Commands
These commands print graphics data and are listed in numerical order of their
hexadecimal codes.
Graphics Commands
Hexadecimal Code Command Page
1B 24, etc.
Set Absolute Starting Position
160
1B 2A m, etc.
Set Bit Image Mode 61
1B 4B, etc. Single-Density Graphics 62
1B 4C, etc.
1B 59, etc.
Double-Density Graphics 62
1D 2A, etc. Define Downloaded Bit Image 63
1D 2F m
Print Downloaded Bit Image 63
1
This printer function command is also used in graphics to emulate an Epson
LQ-950™ printer to handle graphics output from word processing programs.