Specifications

Chapter 6: Commands 7193 Owner’s Guide
August 199844
Printer Function Commands
Hexadecimal Code Command Page
09 Horizontal Tab 47
0A Line Feed 47
0D Carriage Return 47
10 Clear Printer 48
14 n Feed n Print Lines
48
15 n Feed n Dot Rows
48
16 n Add n Extra Dot Rows
48
17 Print 49
19
1B 69
Full Knife Cut 49
1A
1B 6D
Partial Knife Cut 49
1B 07 Generate Tone 49
1B 14 n
Set Column 49
1B 20 n
Set Character Right Side Spacing (Not Implemented) 49
1B 24, etc. Set Absolute Starting Position 50
1B 32 Set Line Spacing to 1/6 Inch 50
1B 33 n Set Line Spacing to n Minimum Units
50
1B 3D n
Select Peripheral Device 51
1B 40 Initialize Printer 51
1B 44, etc. Set Horizontal Tab Positions 51
1B 4A n Print and Feed n Minimum Units
51
1B 5C, etc. Set Relative Starting Position 52
1B 61 n
Align Character Positions 53
1B 63 34 n
Select Sensors to Stop Printing (Not Implemented) 53
1B 63 35 n
Enable or Disable Panel Switch 53
1B 64 n Print and Feed n Lines
53
1B 6A k
Read from Non-Volatile Memory 53
1B 70 n, etc.
Generate Pulse to Open Cash Drawer 53
1B 73 n, etc.
Write to Non-Volatile Memory 54
1D 4C n n
Set Left Margin 54
1D 50 x y
Set Horizontal and Vertical Minimum Motion Units 55
1D 56 m
1D 56 m n
Select Cut Mode and Cut Paper 55
1D 57 nL nH
Set Printing Area Width 56