Specifications

Chapter 5: Communication 7193 Owner’s Guide
August 199838
DIP Switch Settings for RS-232C Parameters
Switch Settings Description
1OFF
ON
On-line Mode (default)
Level 1 Diagnostics (setup mode)
2OFF
ON
DTR/DSR Protocol (default)
XON/XOFF Protocol
3OFF
ON
Without Parity (default)
With Parity
4* OFF
ON
Odd Parity
Even Parity
5, 6 5
OFF
ON
OFF
ON
6
OFF
OFF
ON
ON
19,200 Baud
9600 Baud (default)
4800 Baud
1200 Baud
*Switch 4 is not used if the parity is disabled (switch 3 set to OFF).
Note: The following options are set with the printer in the setup mode. See “Level 1
Diagnostics” in chapter 4 for more information.
DIP Switch Settings for Data Error and Data Buffer Options (Choose one from each option)
Switch 1 Switch 2 Switch 3 Switch 4 Switch 5 Switch 6 Option
On Off On Off Off Off “?” for Data Errors (Default)
On Off On Off Off On Ignore Data Errors
On Off On Off On Off 4K Byte Data Buffer (Default)
On Off On Off On On One Line Data Buffer
Note: Other settings not used.